Stainless Steel Bespoke Braided Flexible Hose Assemblies

Fast RFQ Upload

* Indicates required fields

Full RFQ Form Click Here

DESIGN & MATERIAL CONSTRUCTION

Hose
Stainless Steel 316L

Braid
Stainless Steel AISI 304/304L

Temp
-269°C – +600°C

Sizes
¼” NB – 16” NB

DESCRIPTION

Whitehouse Stainless Steel Hoses are manufactured in accordance with ISO 10380 : 2012. Our hose assemblies are available either unbraided, braided with a single stainless steel external wire braid or with a double braid for increased working pressure. Our range of A200 & A700 Heavy Duty Stainless Steel Hoses are designed for more arduous installations and higher working pressure applications. We stock a wide range of end fittings, in various materials such as carbon steel & stainless steel (other materials are available on request).

– BSPT / NPT Hex Fixed Male Connections
– BSPT / NPT Weld Nipple Connections
– BSP Cone Seat Swivel Unions (60 Degree)
– BSP Full Male Union (Cone Seat Swivel Unions (60 Degree) with Male / Male adaptors) – (various thread options available from stock)
– BSP Full Female Union (Cone Seat Swivel Unions (60 Degree) with Male / Female adaptors) – (various thread options available from stock)
– BSPT / NPT Fixed Female Connections
– Flanged Connections (Fixed) – Typically PN16 / ASA 150lb (others available from stock)
– Flanged Connections (Swivel) – Typically PN16 / ASA 150lb (others available from stock)
– Tube End Connections (offered as Stock OD sizes with gauge or Schedule wall thicknesses)
– Victaulic Grooved connections

All end fittings listed above can be supplied with a 45 Degree, 90 Degree or 135 Degree
configuration – contact our sales office for more information.

APPLICATIONS

Building services
HVAC-R piping lines
Pump connections
Vibration producing systems
Industrial process & applications
Steam connections
Chemical process
Gas connections
Ultra-high vacuum applications
Exhaust systems

QUALITY & ASSOCIATED STANDARDS

Whitehouse metal hoses are produced by fully penetrated TIG welding method to our approved weld procedures.
Each and every unit manufactured is 100% pressure tested to a minimum hydrostatic pressure test of 1.5 times of the design pressure.
PED 2014/68/EU approval and material certificates to EN 10204 is available for all sizes.

ADVANTAGES

Absorption of heat expansion
Absorption of angular movements
Compensation of parallel pipeline set off
Absorption of oscillations
Installation involving high and low temperatures
Vibration elimination

More Information

TYPE 100 – STANDARD PITCH

TYPE 200 – STANDARD PITCH

TYPE 700 – HEAVY DUTY HOSE

TEMPERATURE / PRESSURE CORRECTION

REDUCTION COEFFICIENT OF PRESSURE AS A FUNCTION OF TEMPERATURE

END FITTINGS – HALF SECTION

PRESSURE DROP

The pressure loss in corrugated hose is 10% higher than in new welded steel pipes. This means that in the case of corrugated hose an increase in diameter of approximately 15% is required to reduce the pressure loss to the value of pressure loss in steel pipes. To utilise the chart…

Identify the flow rate required on the base line (Horizontal Axis)
Where the vertical line, that references to the nominal bore of the hose, intersects a horizontal line – Establish the pressure drop on the Vertical Axis. (Any data provided is for reference only. Please contact our sales team for additional information if required).